Upgrade high-speed fibre networks with this 10-pack of FS.com 10GBASE-BX10-U industrial BiDi SFP+ optical transceiver modules. Each hot-pluggable module provides 10 Gigabit Ethernet connectivity up to 10 km over a single strand of OS2 single-mode fibre, allowing efficient use of existing fibre infrastructure in enterprise, industrial and telecommunications environments.
Key Features
- 10 modules per package: One factory multipack containing ten matching FS.com SFP-10G23-BX10-I transceivers.
- 10 Gigabit connectivity: SFP+ form factor for supported 10GBASE-BX/10GBASE-LR-class network interfaces.
- BiDi single-fibre technology: Transmits at 1270 nm and receives at 1330 nm over one OS2 single-mode fibre strand, using a simplex LC optical connector.
- Up to 10 km reach: Designed for long-distance single-mode fibre links.
- Industrial-temperature operation: Rated for -40°C to +85°C, suitable for appropriately protected equipment in demanding installations.
- Digital optical monitoring (DOM/DDM): Access real-time module diagnostics including temperature, supply voltage, transmit power and receive power on compatible networking equipment.
- Hot-pluggable interface: SFP+ 20-pin electrical connection and low-power module design.
- Cisco-compatible coding: FS product 111845 is supplied as a compatible alternative to Cisco SFP-10G-BXU-I; actual operation depends on host hardware and firmware compatibility.
Specifications (Per Module)
- Manufacturer: FS.com (FS)
- Manufacturer Part Number: SFP-10G23-BX10-I
- FS Product ID: 111845
- Cisco Reference: SFP-10G-BXU-I compatible
- Form Factor: SFP+
- Ethernet Standard: 10GBASE-BX10-U BiDi
- Nominal Data Rate: 10 Gb/s (up to 10.3125 Gb/s)
- Transmit Wavelength: 1270 nm
- Receive Wavelength: 1330 nm
- Maximum Link Distance: 10 km
- Optical Fibre: OS2 single-mode (SMF), one strand
- Optical Connector: Simplex LC
- Operating Temperature: -40°C to +85°C
- Digital Diagnostics: DOM/DDM supported
- Power Consumption: Up to 1 W
- Laser: Class 1
- Package Quantity: 10 identical transceiver modules
Compatibility and Installation
Important: These are 1270 nm TX / 1330 nm RX (BXU) modules. A working BiDi fibre link requires a complementary 1330 nm TX / 1270 nm RX (BXD) transceiver at the opposite end. This 10-pack contains BXU modules only; complementary BXD modules and fibre cables are not included.
Check the required wavelength pair, SFP+ port support and any manufacturer-specific transceiver coding requirements before installation. Specifications are based on FS.com product documentation.
100% as described or your money back.
If the item you receive does not match the listing, we will make it right.Upgrade high-speed fibre networks with this 10-pack of FS.com 10GBASE-BX10-U industrial BiDi SFP+ optical transceiver modules. Each hot-pluggable module provides 10 Gigabit Ethernet connectivity up to 10 km over a single strand of OS2 single-mode fibre, allowing efficient use of existing fibre infrastructure in enterprise, industrial and telecommunications environments.
Key Features
- 10 modules per package: One factory multipack containing ten matching FS.com SFP-10G23-BX10-I transceivers.
- 10 Gigabit connectivity: SFP+ form factor for supported 10GBASE-BX/10GBASE-LR-class network interfaces.
- BiDi single-fibre technology: Transmits at 1270 nm and receives at 1330 nm over one OS2 single-mode fibre strand, using a simplex LC optical connector.
- Up to 10 km reach: Designed for long-distance single-mode fibre links.
- Industrial-temperature operation: Rated for -40°C to +85°C, suitable for appropriately protected equipment in demanding installations.
- Digital optical monitoring (DOM/DDM): Access real-time module diagnostics including temperature, supply voltage, transmit power and receive power on compatible networking equipment.
- Hot-pluggable interface: SFP+ 20-pin electrical connection and low-power module design.
- Cisco-compatible coding: FS product 111845 is supplied as a compatible alternative to Cisco SFP-10G-BXU-I; actual operation depends on host hardware and firmware compatibility.
Specifications (Per Module)
- Manufacturer: FS.com (FS)
- Manufacturer Part Number: SFP-10G23-BX10-I
- FS Product ID: 111845
- Cisco Reference: SFP-10G-BXU-I compatible
- Form Factor: SFP+
- Ethernet Standard: 10GBASE-BX10-U BiDi
- Nominal Data Rate: 10 Gb/s (up to 10.3125 Gb/s)
- Transmit Wavelength: 1270 nm
- Receive Wavelength: 1330 nm
- Maximum Link Distance: 10 km
- Optical Fibre: OS2 single-mode (SMF), one strand
- Optical Connector: Simplex LC
- Operating Temperature: -40°C to +85°C
- Digital Diagnostics: DOM/DDM supported
- Power Consumption: Up to 1 W
- Laser: Class 1
- Package Quantity: 10 identical transceiver modules
Compatibility and Installation
Important: These are 1270 nm TX / 1330 nm RX (BXU) modules. A working BiDi fibre link requires a complementary 1330 nm TX / 1270 nm RX (BXD) transceiver at the opposite end. This 10-pack contains BXU modules only; complementary BXD modules and fibre cables are not included.
Check the required wavelength pair, SFP+ port support and any manufacturer-specific transceiver coding requirements before installation. Specifications are based on FS.com product documentation.
Product details
Upgrade high-speed fibre networks with this 10-pack of FS.com 10GBASE-BX10-U industrial BiDi SFP+ optical transceiver modules. Each hot-pluggable module provides 10 Gigabit Ethernet connectivity up to 10 km over a single strand of OS2 single-mode fibre, allowing efficient use of existing fibre infrastructure in enterprise, industrial and telecommunications environments.
Key Features
- 10 modules per package: One factory multipack containing ten matching FS.com SFP-10G23-BX10-I transceivers.
- 10 Gigabit connectivity: SFP+ form factor for supported 10GBASE-BX/10GBASE-LR-class network interfaces.
- BiDi single-fibre technology: Transmits at 1270 nm and receives at 1330 nm over one OS2 single-mode fibre strand, using a simplex LC optical connector.
- Up to 10 km reach: Designed for long-distance single-mode fibre links.
- Industrial-temperature operation: Rated for -40°C to +85°C, suitable for appropriately protected equipment in demanding installations.
- Digital optical monitoring (DOM/DDM): Access real-time module diagnostics including temperature, supply voltage, transmit power and receive power on compatible networking equipment.
- Hot-pluggable interface: SFP+ 20-pin electrical connection and low-power module design.
- Cisco-compatible coding: FS product 111845 is supplied as a compatible alternative to Cisco SFP-10G-BXU-I; actual operation depends on host hardware and firmware compatibility.
Specifications (Per Module)
- Manufacturer: FS.com (FS)
- Manufacturer Part Number: SFP-10G23-BX10-I
- FS Product ID: 111845
- Cisco Reference: SFP-10G-BXU-I compatible
- Form Factor: SFP+
- Ethernet Standard: 10GBASE-BX10-U BiDi
- Nominal Data Rate: 10 Gb/s (up to 10.3125 Gb/s)
- Transmit Wavelength: 1270 nm
- Receive Wavelength: 1330 nm
- Maximum Link Distance: 10 km
- Optical Fibre: OS2 single-mode (SMF), one strand
- Optical Connector: Simplex LC
- Operating Temperature: -40°C to +85°C
- Digital Diagnostics: DOM/DDM supported
- Power Consumption: Up to 1 W
- Laser: Class 1
- Package Quantity: 10 identical transceiver modules
Compatibility and Installation
Important: These are 1270 nm TX / 1330 nm RX (BXU) modules. A working BiDi fibre link requires a complementary 1330 nm TX / 1270 nm RX (BXD) transceiver at the opposite end. This 10-pack contains BXU modules only; complementary BXD modules and fibre cables are not included.
Check the required wavelength pair, SFP+ port support and any manufacturer-specific transceiver coding requirements before installation. Specifications are based on FS.com product documentation.